40A 8 Pole NO 110/-120VAC Contactor with 35x150 mm DIN Rail and 2 #10 Screws

Description

Electrodepot 40 Amp 8 Pole (4 Pole x 2) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with DIN Rail, 35 x 150 mm and 2 #10 Screws
BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator; one (1) compatible Slotted Steel Zinc Plated 35mm x 150mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation
CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters; and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 150mm (6”) and thickness 5mm (0.2”)
ABOUT CONTACTOR
40 Amp 8 Pole Normally Open Contactors (4 Pole x 2) for home or industrial uses.
With applications in lighting, motor and switching.
Technical Specifications:
– Contactor IEC 400V
– Contactor Type NO
– Inductive Load: 40A
– Resistive Load: 63A
– DC Load: 30A, @ 24VDC
– Power status indicator
– Number of Poles 4 x 2
– Coil Volts: 110/120VAC, 50/60 Hz
– Coil Load: Inrush 52VA, Sealed 10VA
– IEC AC Rate: AC-1, 10 kW. AC-3, 8 kW
– Electric e strength: 4 kV
– Operating Temperature: -30…+70 °C (-22…+158 °F)
– 1 HP @ 1 Phase - 120V
– 2 HP @ 1 Phase - 230V
– 5 HP @ 3 Phase - 208V
– 5 HP @ 3 Phase - 230V
– 10HP @ 3 Phase - 480V
– Weight: 0.88 lb (0.42 kg)
– Width: 2.1" (54 mm)
– Height: 3.3" (84 mm)
– Depth: 2.5" (64 mm)
– CE approved 61095, UL pending
– Base or DIN 35mm mount
Wiring:
Solid Conductor: 25 mm2 Max torque 0.6 Nm
Stranding Conductor: 16 mm2, Max torque 0.6 Nm
Compliance:
CSA C22.2 No. 14, EN 60947-4-1, EN 60947-5-1, IEC 947-2, IEC 60947-4-1, IEC 60947-5-1, UL 508
ABOUT DIN RAIL
DIN Rails are the standard mounting support for any electromechanical component, device or equipment
designed using the DIN specifications adopted by European (EN) and international (IEC) standards.
The rail features slots throughout its length making it easy to attach to a panel, wall or equipment.
For support of mini circuit breakers, contactors, auxiliary relays, terminal blocks, low voltage apparatuses, etc.
– Width: 35mm (1.375”)
– Length 150mm (6”)
– Thickness 5mm (0.2”)
ABOUT SCREWS
Drive stainless steel truss head screws (#10, 1/2"") for immediate installation.